Ice Maker Repair Scottsdale

It can be easy to boil over when you open up the bin of your ice maker only to find it empty. Before you abandon all hope for a cool beverage, here are several possible culprits. If you’d rather skip the troubleshooting and get to the root of the problem, call your ice maker repair specialists at Tiger Appliance Repair today!

Freezer Temperature Too High

Your ice maker may not produce ice cubes if the freezer temperature is above 10 degrees Fahrenheit. For optimum ice maker efficiency, keep the freezer temperature between 0 and 5 degrees Fahrenheit.

Door Switch Malfunction

The door switch controls the ice and water dispenser. When the refrigerator door is open, the ice dispenser will not turn on. Sometimes, the door switch fails and needs to be replaced by a professional technician.

Faulty Ice Maker Switch

Sometimes, the ice maker switch can be turned off by mistake. Check to ensure that the switch is turned on. If it is on, but the ice maker isn’t making ice, then the part may be defective. We recommend calling your ice maker repair professionals at Tiger Appliance Repair to test the ice maker switch and replace it if necessary.

Defective Ice Maker Mold Thermostat

The ice maker mold thermostat keeps track of the temperature of the ice maker mold. Once the mold reaches an ideal temperature, the ice maker dumps the ice cubes. If the mold thermostat is malfunctioning, the ice maker will stop producing new ice.

There are a few common reasons for an ice maker overflowing. The most likely cause for this is the water valve on the back of the refrigerator. If this valve stays open too long, the ice maker will continue to make ice even when the ice bucket is full.

Defective Ice Maker Assembly

If the ice maker is overflowing, it may be an issue with the ice maker ejector arm or other ice maker assembly component. Unfortunately, if one part of the assembly begins to malfunction, the entire unit may need to be replaced.

Ice Level Control Board Malfunction

If your refrigerator uses an infrared beam to sense the level of the ice in the ice bucket, there is a chance that it may stop working. If the ice level control board is defective, it needs to be replaced by a professional technician.

Faulty Water Inlet Valve

If the water pressure in your home is too low, the water inlet valve may not be closing completely. This may allow additional water to flow into the ice maker, creating more ice than necessary. Check the water flow and test the pressure to ensure that it is at least 20 psi. If the water pressure is up to standard, the water inlet valve may be defective. We suggest scheduling professional ice maker repair in Scottsdale if this is the case.

Poor quality ice indicates that water is full of impurities. Ice also absorbs surrounding food gases and smells. If you are storing ice in the same area as food, make sure the food is tightly packed and throw out old ice regularly.

Dirty System Filter

Ice that tastes like sulfur or minerals can be extremely unpleasant. When was the last time you changed your water filter? Typically, you should change your filter every six months (possibly more depending on your ice usage). Read your ice maker owner’s manual for instructions specific to your model.

Mildew Growth

Odd smells from mildew can find their way into your ice. Keep the inside of your unit clean and dry. Regularly clean your freezer and refrigerator inside walls using baking soda, an alkaline, non-toxic cleaning agent. Avoid using products such as ammonia and bleach because these chemicals may damage the surface walls.

Stale Ice Cubes

It is not uncommon for ice cubes to absorb odors from spoiled food inside of your refrigerator. New and old ice cubes will absorb food gases. Use ice as soon as possible and throw out old food past the expiration date. Double wrap and bag food products with compromised packaging to combat strong food odors. It might also be helpful to invest in a freezer deodorizer.